Installation [10/2014 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

INSTALL TRANSMISSION WIRE

Coat the O-ring with ATF.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	O-ring
	Toyota Genuine ATF WS

Coat the bolt with ATF.
Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.
Torque: 10.8 N.m (110 kgf/cm, 8 ft.lbf)
Connect the transmission wire to the clamp.
Connect the 9 connectors.