LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission (U661E) - Service Information (1 Of 2)) >> Speed Sensor >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to REMOVAL [10/2014 - ] 

  2. REMOVE TRANSMISSION REVOLUTION SENSOR 
    1. Disconnect the transmission revolution sensor connector.
    2. Remove the 2 bolts and transmission revolution sensor from the transmission valve body assembly.
      GTY129994Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals