LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission (U661E) - Service Information (1 Of 2)) >> Shift Paddle Switch >> Removal [10/2014 - 09/2017] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Do not replace the spiral cable with the battery connected and the engine switch on.
  • Do not rotate the spiral cable when the following conditions are met: 1) The steering wheel is removed, 2) the battery is connected, and 3) the engine switch is on (IG).
  • Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.
  • Do not remove the steering sensor from the spiral cable.
scientia non olet · About LEMON Manuals