LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transmission (U661E) - Service Information (1 Of 2)) >> Shift Paddle Switch >> Installation [10/2014 - 09/2017] >> Procedure

Installation [10/2014 - 09/2017]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY 
    1. Connect the 2 transmission shift switch assembly connectors to install the No. 1 switch wire to the 2 transmission shift switch assemblies.
    2. Install the 2 transmission shift switch assemblies to the steering wheel assembly with 4 new screws.
    3. Connect the 5 guides to install the 2 transmission shift switch assemblies with No. 1 switch wire to the steering wheel assembly.
    4. Connect the No. 1 switch wire connector.
  2. INSTALL STEERING WHEEL ASSEMBLY 

    Refer to INSTALLATION [10/2014 - 09/2017]

scientia non olet · About LEMON Manuals