Reassembly [10/2014 - ]: Procedure

1. Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   • SST: 09350-32014 
     1. 09351-32140

   Standard Depth

   -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

2. Coat the lip of the front oil pump oil seal with MP grease.

1. Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Ensure that the front oil pump body O-ring is not twisted.

1. Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing upward.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Coat the front oil pump drive gear with ATF, and install it to the front oil pump body sub-assembly with the marked side facing upward.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Align each knock pin of the stator shaft assembly with the holes in the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Using a T30 "TORX" socket wrench, install the 16 bolts.

   Torque: 9.3 N.m (95 kgf/cm, 82 in.lbf) 

   Bolt Length

   Bolt	Length (mm (in.))
   A	14 mm (0.551)
   B	26 mm (1.024)

See step  1