LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Interior) - Service Information >> Room Light >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE SPOT LIGHT ASSEMBLY (ROOM LIGHT) 
    1. Using a screwdriver, detach the 4 clips.

      HINT: 

      Tape the screwdriver tip before use.

      GTY518484Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Protective Tape
    2. Disconnect the connector and remove the spot light assembly (room light).
scientia non olet · About LEMON Manuals