LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Combination Meter >> Installation [10/2014 - 09/2017] >> Procedure

Installation [10/2014 - 09/2017]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connectors and attach the clamp.
      GTY497330Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Screw
    2. Install the combination meter assembly with the 4 screws.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14 [10/2014 - 09/2017]

  3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 15

  4. INSTALL NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 16

  5. INSTALL INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 17

  6. INSTALL NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 18

  7. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 19

  8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 20

  9. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 21

  10. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 22

  11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH 

    Refer to PROCEDURE - Step 23

  12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH 

    Refer to PROCEDURE - Step 24

  13. INSTALL UPPER REAR CONSOLE PANEL 

    Refer to PROCEDURE - Step 25

  14. INSTALL CONSOLE ARMREST ASSEMBLY 

    Refer to PROCEDURE - Step 26

  15. ENABLE AUTOAWAY/RETURN FUNCTION 
    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter.

      Refer to CUSTOMIZE PARAMETERS [10/2014 - ]

scientia non olet · About LEMON Manuals