Hybrid System Indicator Malfunction [10/2017 - ]: Procedure

1. Using the Techstream, perform the Active Test.

   Refer to DATA LIST / ACTIVE TEST [10/2017 - 10/2020] , or refer to DATA LIST / ACTIVE TEST [10/2020 - 11/2021] , or refer to DATA LIST / ACTIVE TEST [11/2021 - 10/2023] , or refer to DATA LIST / ACTIVE TEST [10/2023 - ]

   Body Electrical > Combination Meter > Data List 

   Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
   HV/EV System Indicator	Hybrid system indicator value	Min.: -101%, Max.: 511% or Unset	Current hybrid system indicator value	"Unset" is displayed when the vehicle is stopped and the power switch is on (READY).

   Body Electrical > Combination Meter > Data List 

   Tester Display
   HV/EV System Indicator

   OK

   Hybrid system indicator value displayed on the Techstream is almost the same as the hybrid system indicator indication.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [10/2017 - 10/2020]  , or refer to  REMOVAL [10/2020 - 11/2021]  , or refer to  REMOVAL [11/2021 - 10/2023]  , or refer to  REMOVAL [10/2023 - ] 

Result: 

NG 

See step  2

1. Replace the combination meter assembly.

   Refer to REMOVAL [10/2017 - 10/2020] , or refer to REMOVAL [10/2020 - 11/2021] , or refer to REMOVAL [11/2021 - 10/2023] , or refer to REMOVAL [10/2023 - ]

2. Check that the operation of the hybrid system indicator returns to normal.

   OK

   The operation of the hybrid system indicator returns to normal.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END (COMBINATION METER ASSEMBLY IS DEFECTIVE) 

Result: 

NG 

REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL [10/2017 - 09/2018]  , or refer to  REMOVAL [09/2018 - 10/2020]  , or refer to  REMOVAL [10/2020 - 11/2021]  , or refer to  REMOVAL [11/2021 - 10/2022]  , or refer to  REMOVAL [10/2022 - 10/2023]  , or refer to  REMOVAL [10/2023 - ]