Removal [12/2017 - 09/2018]: Procedure
- REMOVE ENGINE ASSEMBLY
Refer to REMOVAL [12/2017 - 09/2018]
- REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH (for 2WD)
Refer to REMOVAL [12/2017 - 09/2018]
- REMOVE CONVERTER ASSEMBLY RH
Refer to REMOVAL [12/2017 - ]
- REMOVE CONVERTER ASSEMBLY LH
Refer to REMOVAL [12/2017 - ]
- REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
- DISCONNECT NO. 1 TURBO WATER PIPE SUB-ASSEMBLY
- DISCONNECT NO. 2 TURBO WATER PIPE SUB-ASSEMBLY
- DISCONNECT NO. 1 PCV TUBE
- DISCONNECT NO. 2 PCV TUBE
- DISCONNECT VACUUM HOSE
- REMOVE NO. 1 AIR HOSE
- REMOVE NO. 1 TURBO INSULATOR
- REMOVE NO. 3 TURBO INSULATOR
- REMOVE NO. 1 TURBOCHARGER SUB-ASSEMBLY
- Remove the bolt from the No. 1 air inlet duct sub-assembly.
- Remove the 3 bolts and turbo water pipe stay.
- Remove the 2 bolts and union bolt to disconnect the turbo oil inlet pipe sub-assembly LH.
- Remove the gasket from the union bolt.
- Remove the gasket from the turbo oil inlet pipe sub-assembly LH.
- Remove the 3 nuts and No. 1 turbocharger sub-assembly.
- Remove the gasket from the cylinder head sub-assembly.
- Remove the bolt from the No. 1 air inlet duct sub-assembly.
- REMOVE NO. 2 TURBOCHARGER SUB-ASSEMBLY
- Remove the bolt from the No. 2 air inlet duct sub-assembly.
- Remove the 2 bolts and compressor elbow stay.
- Remove the 2 bolts and union bolt to disconnect the turbo oil inlet pipe sub-assembly RH.
- Remove the gasket from the union bolt.
- Remove the gasket from the turbo oil inlet pipe sub-assembly RH.
- Remove the bolt, 3 nuts and No. 2 turbocharger sub-assembly.
- Remove the gasket from the cylinder head sub-assembly.
- Remove the bolt from the No. 2 air inlet duct sub-assembly.
- REMOVE NO. 5 TURBO INSULATOR
- Remove the bolt and No. 5 turbo insulator from the cylinder head sub-assembly LH.
- REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY RH
- REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY LH
- REMOVE NO. 1 COMPRESSOR OUTLET ELBOW
- REMOVE NO. 2 COMPRESSOR OUTLET ELBOW
- REMOVE NO. 1 AIR INLET DUCT SUB-ASSEMBLY
- REMOVE NO. 2 AIR INLET DUCT SUB-ASSEMBLY
- REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY
- REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY
- REMOVE NO. 4 ENGINE COVER
- REMOVE NO. 5 ENGINE COVER
- REMOVE NO. 1 TURBO INSULATOR STAY