LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> LS 500 Base, RWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Axle And Differential - Service Information (2 Of 3) >> Front Differential Carrier Assembly >> Removal [12/2017 - 09/2018] >> Procedure

Removal [12/2017 - 09/2018]: Procedure

  1. DRAIN DIFFERENTIAL OIL 

    Refer to PROCEDURE - Step 2

  2. REMOVE ENGINE ASSEMBLY 

    Refer to REMOVAL [12/2017 - 09/2018]

  3. REMOVE PROPELLER SHAFT HEAT INSULATOR 
    1. Remove the 2 bolts and propeller shaft heat insulator.
      GTY821927Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY 
    1. Support the front differential carrier assembly with a jack.
      WARNING:

      As the front differential carrier assembly is very heavy, securely support it with the jack.

    2. GTY815118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Remove the 5 bolts and front differential carrier assembly.

      NOTE:
      • Do not damage the installation surface when removing the front differential carrier assembly.
      • The remaining oil may leak out when removing the front differential carrier assembly.
scientia non olet · About LEMON Manuals