Installation [10/2023 - ]: Procedure

INSTALL ID CODE BOX (IMMOBILIZER CODE ECU)

NOTE:

Do not reuse dropped or damaged parts.

Attach the claw as shown in the illustration.

GTY810111

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

Attach the claw to install the ID code box (immobiliser code ECU) as shown in the illustration.

GTY777558

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Install in this Direction (1)
	Install in this Direction (2)

INSTALL AIR CONDITIONING UNIT ASSEMBLY
Refer to INSTALLATION [10/2023 - ]
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 2
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
Refer to PROCEDURE - Step 11
INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Refer to WORK PROCEDURE [10/2023 - ]

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [10/2023 - ]
PERFORM CODE REGISTRATION
Refer to REGISTRATION [10/2023 - ]
PERFORM DIAGNOSTIC SYSTEM CHECK
Refer to DTC CHECK / CLEAR [10/2023 - ]
CHECK SRS WARNING LIGHT
Refer to OPERATION CHECK [10/2023 - ]