LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> LS 500 Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (W/ Vacuum Brake Booster) - Diagnostic Codes (4 Of 4) & Symptom Tests >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster) >> Zero Point Calibration of Steering Angle Sensor Not Acquired (X20D8) [09/2018 - 10/2023] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • This Vehicle Control History (RoB) may be output during situations when the steering angle sensor zero point calibration temporarily cannot be acquired, such as when the stop light is stuck ON.
  • If the acceleration sensor (yaw rate sensor) was replaced or reinstalled, perform "Calibration".

    Refer to CALIBRATION [09/2018 - 10/2023]