DTC C1442: Invalid Data Received from Deceleration Sensor; DTC C1443: Invalid Data Received from Yaw Rate Sensor [12/2017 - 09/2018]: Description
The skid control ECU (brake actuator assembly) receives signals from the acceleration sensor (yaw rate sensor) via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| C1442 | Invalid Data Received from Deceleration Sensor | When voltage at terminal +BS is 9.5 to 17.4 V, sensor invalid information received from acceleration sensor is ON continuously for 10 seconds or more. | Acceleration sensor (yaw rate sensor) | - |
| C1443 | Invalid Data Received from Yaw Rate Sensor | When voltage at terminal +BS is 9.5 to 17.4 V, sensor invalid information received from yaw rate sensor is ON continuously for 10 seconds or more. | Yaw rate sensor | - |