DTC C0526-2A: Steering Angle Sensor Module Signal Stuck In Range [09/2018 - 10/2023]: Description
The skid control ECU (brake actuator assembly) receives signals from the steering sensor via CAN communication.
HINT:
When a malfunction occurs in the communication line to the steering sensor, U0126-87 is output.
If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.
DTCs may be stored if one of the following occurs:
- Steering angle sensor zero point value malfunction.
- Steering angle sensor signal malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| C0526-2A | Steering Angle Sensor Module Signal Stuck In Range | Normal communication between the skid control ECU and the steering sensor and abnormal steering sensor zero point. |
|
- |
- *1: w/o Variable Gear Ratio Steering System
- *2: w/ Variable Gear Ratio Steering System