DTC B1925: Short in Rear P/T Squib (LH) Circuit; DTC B1926: Open in Rear P/T Squib (LH) Circuit; DTC B1927: Short in Rear P/T Squib (LH) Circuit (to Ground); DTC B1928: Short in Rear P/T Squib (LH) Circuit (to +B) [05/2023 - ]: Description
The rear seat belt pretensioner LH circuit consists of the airbag ECU assembly and rear No. 1 seat outer belt assembly LH.
This circuit instructs the SRS to deploy when deployment conditions are met.
These DTCs are stored when a malfunction is detected in the rear seat belt pretensioner LH circuit.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
|---|---|---|---|---|---|
| B1925 | Short in Rear P/T Squib (LH) Circuit | One of the following conditions is met:
|
|
Comes on | Applicable |
| B1926 | Open in Rear P/T Squib (LH) Circuit | One of the following conditions is met:
|
|
Comes on | Applicable |
| B1927 | Short in Rear P/T Squib (LH) Circuit (to Ground) | One of the following conditions is met:
|
|
Comes on | Applicable |
| B1928 | Short in Rear P/T Squib (LH) Circuit (to +B) | One of the following conditions is met:
|
|
Comes on | Applicable |