DTC B1920: Short in Rear P/T Squib (RH) Circuit; DTC B1921: Open in Rear P/T Squib (RH) Circuit; DTC B1922: Short in Rear P/T Squib (RH) Circuit (to Ground); DTC B1923: Short in Rear P/T Squib (RH) Circuit (to +B) [04/2020 - 05/2023]: Description
The rear seat belt pretensioner RH circuit consists of the airbag ECU assembly and rear No. 1 seat outer belt assembly RH.
This circuit instructs the SRS to deploy when deployment conditions are met.
These DTCs are stored when a malfunction is detected in the rear seat belt pretensioner RH circuit.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
|---|---|---|---|---|---|
| B1920 | Short in Rear P/T Squib (RH) Circuit | One of the following conditions is met:
|
|
Comes on | Applicable |
| B1921 | Open in Rear P/T Squib (RH) Circuit | One of the following conditions is met:
|
|
Comes on | Applicable |
| B1922 | Short in Rear P/T Squib (RH) Circuit (to Ground) | One of the following conditions is met:
|
|
Comes on | Applicable |
| B1923 | Short in Rear P/T Squib (RH) Circuit (to +B) | One of the following conditions is met:
|
|
Comes on | Applicable |