Caution / Notice / Hint
NOTE:
- After the engine switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.
- When disconnecting and reconnecting the battery
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
- After replacing the airbag ECU assembly, refer to initialization.
Refer to WORK PROCEDURE [05/2023 - ]
HINT:
To perform the simulation method, enter check mode (signal check) with the Techstream (Refer to CHECK MODE PROCEDURE [03/2017 - ] ), and then wiggle each connector of the airbag system or drive the vehicle on various types of road (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [05/2023 - ] ).