DTC C1442: Invalid Data Received from Deceleration Sensor; DTC C1443: Invalid Data Received from Yaw Rate Sensor [09/2018 - ]: Description
The skid control ECU assembly receives signals from the yaw rate sensor via the CAN communication system.
The yaw rate sensor detects the vehicle condition using 2 circuits (GL1, GL2).
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|---|
| C1442 | Invalid Data Received from Deceleration Sensor | 322 | With terminal IG1 voltage between 9.5 and 17.4 V, an invalid data signal is received from the acceleration sensor for 10 seconds or more. | Acceleration sensor (Yaw rate sensor) | - |
| C1443 | Invalid Data Received from Yaw Rate Sensor | 340 | With terminal IG1 voltage between 9.5 and 17.4 V, an invalid data signal is received from the yaw rate sensor for 10 seconds or more. | Yaw rate sensor | - |