Removal [05/2023 - ]: Procedure

Refer to PROCEDURE - Step 2 [05/2023 - 09/2023] , or refer to PROCEDURE - Step 2 [09/2023 - ]

Refer to REMOVAL [03/2017 - ]

1. Place both hands at the position shown in the illustration and pull in the direction indicated by the arrow to detach the clip and remove the instrument panel safety pad cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Place Hands Here
   	Remove in this Direction

1. Using moulding remover A, detach the clip as shown in the illustration and remove the No. 2 instrument panel safety pad cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Insert Moulding Remover A Here
   	Remove in this Direction

1. Remove the 2 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Place both hands at the position shown in the illustration and pull in the direction indicated by the arrow to detach the clip and remove the multi-display with bracket.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Place Hands Here
   	Remove in this Diretion

3. Detach the clamp and disconnect the 4 connectors, and remove the multi-display with braket.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 4 screws and multi-display controller bracket A.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002