Installation [05/2023 - ]: Procedure

INSTALL METER MIRROR SUB-ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Bolt
	Connector

Connect the connector.

INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Refer to INSTALLATION [05/2023 - ]
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 2
INSTALL NO. 2 DECK BOARD
Refer to PROCEDURE - Step 13
INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [05/2023 - ]
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Refer to PROCEDURE - Step 18 [05/2023 - 09/2023] , or refer to PROCEDURE - Step 22 [09/2023 - ]
CHECK SRS WARNING LIGHT
Refer to OPERATION CHECK [04/2020 - ]