Installation [10/2016 - 10/2017]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Lexus IS 350, 2017 Lexus IS 300, 2016 Lexus IS 350, 2016 Lexus IS 300, and 2015 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ENGINE OIL LEVEL SENSOR
1. Install a new gasket to the engine oil level sensor.
2. Install the engine oil level sensor with the 4 bolts.
  Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
  
  HINT:
  
  Be sure to clean the contact surface.
3. Connect the engine oil level sensor connector.
ADD ENGINE OIL
See step 7
INSPECT ENGINE OIL LEVEL
Refer to PROCEDURE - Step 1
INSPECT FOR OIL LEAK
See step 8
INSTALL FRONT SUSPENSION MEMBER BRACE (for 2WD)
Refer to PROCEDURE - Step 102