LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> GX 460 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Installation [08/2019 - ] >> Procedure

Installation [08/2019 - ]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Attach the 2 clips.
    3. Install the combination meter assembly with the 2 screws.
  2. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 25 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 27 [08/2021 - ]

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Attach the guide.
    2. Attach the 4 claws.
    3. Attach the 2 clips to install the instrument cluster finish panel sub-assembly.
    4. Attach the 4 claws.
  4. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION 

    Refer to PROCEDURE - Step 28 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 30 [08/2021 - ]

  5. INSTALL NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 29 [08/2019 - 08/2021] , or refer to PROCEDURE - Step 31 [08/2021 - ]

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [08/2019 - 08/2021] , or refer to INITIALIZATION [08/2021 - 08/2022] , or refer to INITIALIZATION [08/2022 - ]

  7. RESTORE AUTOAWAY/RETURN FUNCTION 
    1. Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter.

      Refer to CUSTOMIZE PARAMETERS [08/2019 - ]

scientia non olet · About LEMON Manuals