Installation [05/2018 - ]: Procedure

1. Install the suspension tower damper to the No. 1 frame crossmember assembly and No. 2 frame crossmember assembly with the 4 bolts.

   Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

   NOTE:

   Do not extend or compress the damper.

   HINT: 

   Make sure that the arrow of the bracket faces the front of the vehicle.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Arrow

Refer to PROCEDURE - Step 97