LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> GS 300 Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System - Service Information >> Air Conditioning Panel >> Installation [09/2017 - ] >> Procedure

Installation [09/2017 - ]: Procedure

  1. INSTALL NO. 2 RADIO BRACKET 
    1. Install the No. 2 radio bracket with the 3 screws.
  2. INSTALL NO. 1 RADIO BRACKET 
    1. Install the No. 1 radio bracket with the 3 screws.
  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY 
    1. Connect the connectors.
    2. Insert the multi-media module receiver assembly.
      NOTE:

      When inserting the multi-media module receiver assembly, do not press the knobs on it.

      GTY531155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Attach the 2 claws and 2 clips.
    4. Install the multi-media module receiver assembly with the 2 bolts.
  4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [10/2015 - ]

scientia non olet · About LEMON Manuals