LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> Rear Shock Absorber >> Disposal [06/2018 - ] >> Procedure

Disposal [06/2018 - ]: Procedure

  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY 
    WARNING:
    • Always use a cloth to prevent shards of metal from flying about due to the release of pressurized gas.
    • Always wear safety glasses.
    GTY596062Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    HINT: 

    The gas is colorless, odorless and non-poisonous.

    1. Extend the piston rod and secure the rear shock absorber assembly at an angle in a vise.
      GTY783031Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a hacksaw, slowly make a hole at the position indicated by the arrow in the illustration to discharge the gas inside.
scientia non olet · About LEMON Manuals