LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> Rear Lower Arm >> Removal [08/2020 - 09/2022] >> Procedure

Removal [08/2020 - 09/2022]: Procedure

  1. REMOVE REAR WHEEL 

    Refer to PROCEDURE - Step 1

  2. REMOVE NO. 2 FLOOR UNDER COVER (for Gasoline Model 2WD) 
    1. for LH Side:

      Refer to PROCEDURE - Step 2

  3. REMOVE NO. 1 FLOOR UNDER COVER (for Gasoline Model 2WD) 
    1. for RH Side:

      Refer to PROCEDURE - Step 3

  4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ Height Control Sensor) 
    1. for LH Side:

      Refer to REMOVAL [08/2020 - ]

  5. REMOVE REAR STABILIZER LINK ASSEMBLY 

    for 2WD: Refer to PROCEDURE - Step 5

    for AWD: Refer to PROCEDURE - Step 3

  6. REMOVE REAR COIL SPRING 

    Refer to REMOVAL [08/2020 - 09/2022] 

  7. REMOVE REAR LOWER COIL SPRING INSULATOR 

    See step  8

  8. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY 
    1. Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
      NOTE:

      Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

      GTY763103Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY 
    1. Remove the 2 bolts, 2 nuts and rear No. 1 suspension arm assembly from the rear axle carrier sub-assembly and rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

      GTY763035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals