LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information >> 2GR-FKS Battery >> Removal [08/2021 - 09/2022] >> Procedure

Removal [08/2021 - 09/2022]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    1. Loosen the nut, and disconnect the cable from the negative (-) battery terminal.
      GTY828619Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Refer to INITIALIZATION [08/2021 - 09/2022]

  2. REMOVE BATTERY 
    1. Disengage the 2 claws and remove the battery terminal cap from the positive (+) battery terminal in the order shown in the illustration.
      Fig 1: Battery Terminal Cap Loosening Sequence [08/2021 - 09/2022]
      GTY786370Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Side View of Claws
      Push Battery Terminal Cap Here
      Push
    2. Loosen the nut and disconnect the cable from the positive (+) battery terminal.
      GTY781249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the bolt and No. 2 battery clamp from the battery clamp sub-assembly.
      GTY798063Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    4. Remove the battery from the vehicle.
scientia non olet · About LEMON Manuals