Installation [08/2020 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FUEL PUMP CONTROL ECU BRACKET
- Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.
Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf)
- Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.
- INSTALL FUEL PUMP CONTROL ECU
- Install the fuel pump control ECU to the vehicle body with the nut.
Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf)
- Connect the 2 fuel pump control ECU connectors.
- Return the room partition panel insulator to its original position.
- w/ Silencer Sheet:
- Install the No. 2 room partition panel silencer sheet to the room partition panel insulator.
- Install the fuel pump control ECU to the vehicle body with the nut.
- INSTALL REAR SEAT SIDE GARNISH LH
Refer to PROCEDURE - Step 23
- INSTALL REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 28
- INSTALL REAR SEAT ASSEMBLY
Refer to INSTALLATION [08/2020 - 08/2021] , or refer to INSTALLATION [08/2021 - ]