Installation [08/2020 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL NO. 2 FUEL PRESSURE SENSOR
HINT:
Perform "Inspection After Repair" after replacing the No. 2 fuel pressure sensor.
Refer to INITIALIZATION [08/2020 - ]
- Install a new O-ring to the No. 2 fuel pressure sensor.
- Install the No. 2 fuel pressure sensor holder to the No. 2 fuel pressure sensor as shown in the illustration.
*1 No. 2 Fuel Pressure Sensor *2 No. 2 Fuel Pressure Sensor Holder *a Flat - Using an 8 mm socket wrench, install the No. 2 fuel pressure sensor with the No. 2 fuel pressure sensor holder to the fuel delivery pipe sub-assembly with the bolt.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- Connect the No. 2 fuel pressure sensor connector.
- INSTALL FUEL (ENGINE ROOM SIDE) PUMP ASSEMBLY
Refer to INSTALLATION [08/2020 - 08/2021] , or refer to INSTALLATION [08/2021 - ]
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing the No. 2 fuel pressure sensor.
Refer to INITIALIZATION [08/2020 - ]
- Perform "Inspection After Repair" after replacing the No. 2 fuel pressure sensor.