LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Fuel System (A25A-FKS) - Service Information) >> FUEL PUMP (for High Pressure) >> Removal [08/2020 - 08/2021] >> Procedure

Removal [08/2020 - 08/2021]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

  2. DISCHARGE FUEL SYSTEM PRESSURE 

    Refer to PRECAUTION [08/2020 - ]

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  4. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [08/2020 - 08/2021]

  5. DISCONNECT FUEL TUBE SUB-ASSEMBLY 
    1. Disconnect the fuel tube sub-assembly from the fuel pump assembly.

      Refer to PRECAUTION [08/2020 - ]

      GTY947748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE NO. 1 FUEL PIPE SUB-ASSEMBLY 
    WARNING:

    To prevent serious injury due to fuel spray from the high-pressure fuel lines, always discharge fuel system pressure before removing any fuel system components.

    1. Remove the 2 bolts and fuel pump protector from the cylinder head sub-assembly.
      GTY948118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the ignition coil connector.
      GTY947749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using a 17 mm union nut wrench, loosen the 2 union nuts of the No. 1 fuel pipe sub-assembly.
      GTY947869Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Union Nut
      Bolt
    4. Using an 8 mm socket wrench, remove the bolt.
    5. Loosen the 2 bolts of the fuel pump assembly.
      GTY947747Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Remove the No. 1 fuel pipe sub-assembly from the fuel delivery pipe and fuel pump assembly.
  7. REMOVE FUEL PUMP ASSEMBLY 
    NOTE:

    When replacing the fuel pump assembly, it is necessary to replace the No. 1 fuel pipe sub-assembly with a new one.

    1. Disconnect the fuel pump assembly connector.
      GTY947753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts, fuel pump assembly and fuel pump flange from the cylinder head cover sub-assembly.
      GTY947754Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the O-ring from the fuel pump assembly.
      GTY754529Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the fuel pump lifter assembly from the fuel pump lifter guide.
      GTY754533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the fuel pump spacer gasket from the cylinder head cover sub-assembly.
      GTY754534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals