LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Emission Control System (A25A-FKS) - Service Information) >> Purge Valve >> Installation [08/2020 - ] >> Procedure

Installation [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL PURGE VALVE (PURGE VSV) 
    1. Install the purge valve (purge VSV) to the purge VSV bracket with the bolt.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

      GTY947903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 1 Fuel Vapor Feed Hose
      *2 No. 2 Fuel Vapor Feed Hose
      *a Up
      *b Front
      *c 120°
      *d 2 to 7 mm (0.0787 to 0.276 in.)
    2. Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).
    3. Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

      HINT: 

      Engage the clip within the area shown in the illustration.

    4. Connect the purge valve (purge VSV) connector.
scientia non olet · About LEMON Manuals