LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Lighting System (Ext) (Hybrid) - Diagnostic Codes (1 Of 2)) >> LIGHTING SYSTEM (for HV Model) >> DTC B242E: Open in IG Circuit [06/2018 - 07/2019] >> Description

DTC B242E: Open in IG Circuit [06/2018 - 07/2019]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

The headlight ECU sub-assembly operates using the power source voltage input from the IG terminal and ECUB terminal.

The IG terminal power source voltage is supplied by turning the IG1-NO. 1 relay to ON.

The headlight ECU sub-assembly receives power switch on (IG) signals from the main body ECU (multiplex network body ECU) via CAN communication, compares the power switch on (IG) signal and the power source voltage supply condition of the IG terminal and monitors the result.

AFS*1 OR HL AUTOLEVELING*2

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B242E Open in IG Circuit Detection condition: 
  1. The power switch is on (IG).

Malfunction status: 
  1. When the IG terminal power source voltage is 0 V (power switch off), IG ON signals from the main body ECU (multiplex network body ECU) via CAN communication are continuously received

Malfunction duration: 
  1. 10 seconds or more
  • Headlight ECU sub-assembly LH
  • Harness or connector
Headlight ECU sub-assembly LH
AFS (SUB)*1 OR HL AUTOLEVELING (SUB)*2

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B242E Open in IG Circuit Detection condition: 
  1. The power switch is on (IG).

Malfunction status: 
  1. When the IG terminal power source voltage is 0 V (power switch off), IG ON signals from the main body ECU (multiplex network body ECU) via CAN communication are continuously received

Malfunction duration: 
  1. 10 seconds or more
  • Headlight ECU sub-assembly RH
  • Harness or connector
Headlight ECU sub-assembly RH
  1. *1: for LED Type Turn Signal Light
  2. *2: for Bulb Type Turn Signal Light