DTC P2614-01: Camshaft Position Signal Output "A" General Electrical Failure [08/2021 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0010-01.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P2614-01	Camshaft Position Signal Output "A" General Electrical Failure	Malfunction in rotation sensor of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic).	Cam timing control motor with EDU assembly ECM	Comes on	DTC stored	SAE Code: P2614 DTC for Mexico Models: Applies

SYMPTOMS AND FAIL-SAFE OPERATION DURING CAMSHAFT CONTROL MOTOR MALFUNCTION

Vehicle Condition	Fail-Safe
Engine difficult to start Lack of power	The cam timing control motor with EDU assembly is operated to the most retarded position.