LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Automatic Transmission System (UB80F) - Service Information (1 Of 2)) >> Combination Switch >> Removal [08/2020 - ] >> Procedure

Removal [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to REMOVAL [06/2018 - 08/2021] , or refer to REMOVAL [08/2021 - ]

  2. REMOVE DRIVE MODE SELECT SWITCH (COMBINATION SWITCH ASSEMBLY) 
    1. Disconnect the drive mode select switch (combination switch assembly) connector.
      GTY834843Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp to disconnect the wire harness from the instrument cluster finish panel assembly.
    3. Remove the 3 screws and drive mode select switch (combination switch assembly) from the instrument cluster finish panel assembly.
scientia non olet · About LEMON Manuals