LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Automatic Transmission System (UB80F) - Service Information (1 Of 2)) >> Combination Switch >> Installation [08/2020 - ] >> Procedure

Installation [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL DRIVE MODE SELECT SWITCH (COMBINATION SWITCH ASSEMBLY) 
    1. Install the drive mode select switch (combination switch assembly) to the instrument cluster finish panel assembly with the 3 screws.
    2. Engage the clamp to connect the wire harness to the instrument cluster finish panel assembly.
    3. Connect the drive mode select switch (combination switch assembly) connector.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to INSTALLATION [06/2018 - 08/2021] , or refer to INSTALLATION [08/2021 - ]

scientia non olet · About LEMON Manuals