Inspection [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SHIFT LEVER POSITION SENSOR
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 7 (+B) - 3 (PR) Shift lever in P Below 1 Ω 7 (+B) - 4 (PNB) Below 1 Ω 7 (+B) - 8 (P) Below 1 Ω 7 (+B) - 1 (DB1), 2 (N), 6 (DB2) or 9 (R) Shift lever in P 10 kΩ or higher 7 (+B) - 3 (PR) Shift lever in R Below 1 Ω 7 (+B) - 9 (R) Below 1 Ω 7 (+B) - 1 (DB1), 2 (N), 4 (PNB), 6 (DB2) or 8 (P) Shift lever in R 10 kΩ or higher 7 (+B) - 2 (N) Shift lever in N Below 1 Ω 7 (+B) - 4 (PNB) Below 1 Ω 7 (+B) - 1 (DB1), 3 (PR), 6 (DB2), 8 (P) or 9 (R) Shift lever in N 10 kΩ or higher 7 (+B) - 1 (DB1) Shift lever in D or S Below 1 Ω 7 (+B) - 6 (DB2) Below 1 Ω 7 (+B) - 2 (N), 3 (PR), 4 (PNB), 8 (P) or 9 (R) Shift lever in D or S 10 kΩ or higher *a Component without harness connected
(Shift Lever Position Sensor)HINT:
The shift lever position sensor connector (shift lever position sensor side) does not have a terminal 5.
If the result is not as specified, replace the shift lever position sensor.
- Measure the resistance according to the value(s) in the table below.