LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Hybrid Transaxle System (P710) - Service Information) >> Shift Lever Position Sensor >> Adjustment [06/2018 - ] >> Procedure

Adjustment [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. SECURE VEHICLE 
    1. Fully apply the parking brake and chock a wheel.
      WARNING:
      • Make sure to apply the parking brake and chock a wheel before performing this procedure.
      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
      GTY655852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT SHIFT LEVER POSITION SENSOR POSITION 
    1. Turn the power switch on (READY).
    2. Move the shift lever to D and release the brake pedal.
      WARNING:

      Be sure to apply the parking brake and chock all 4 wheels to secure the vehicle.

    3. Slowly move the shift lever to N and measure the moving distance (A) of the shift lever from the original point to the gear disengagement point.
      GTY774271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Gear Disengagement Point
      NOTE:

      Be sure to move the shift lever slowly.

    4. Move the shift lever to R and release the brake.
      WARNING:

      Be sure to apply the parking brake and chock all 4 wheels to secure the vehicle.

    5. Slowly move the shift lever to N and measure the moving distance (B) of the shift lever from the original point to the gear disengagement point.
      NOTE:

      Be sure to move the shift lever slowly.

    6. Check that the moving distances (A) and (B) shown in the illustration are almost the same.

      HINT: 

      • If the moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.
      • If the moving distance (A) is shorter than (B), perform step [#1] of Adjust Shift Lever Position Sensor Position.
      • If the moving distance (B) is shorter than (A), perform step [#2] of Adjust Shift Lever Position Sensor Position.
  3. ADJUST SHIFT LEVER POSITION SENSOR POSITION 
    1. If the moving distance (A) is shorter than (B). [#1]

      HINT: 

      If the shift lever is moved from R to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.

      1. Move the shift lever to N.
      2. Loosen the 2 bolts.
        GTY745278Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      3. Slightly turn the shift lever position sensor clockwise.
        GTY745280Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      4. Tighten the 2 bolts.

        Torque: 11 N.m (112 kgf/cm, 8 ft.lbf) 

        GTY745278Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      5. Check the shift lever position sensor position.
    2. If the moving distance (B) is shorter than (A). [#2]

      HINT: 

      If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.

      1. Move the shift lever to N.
      2. Loosen the 2 bolts.
        GTY745278Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      3. Slightly turn the shift lever position sensor counterclockwise.
        GTY745271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      4. Tighten the 2 bolts.

        Torque: 11 N.m (112 kgf/cm, 8 ft.lbf) 

        GTY745278Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      5. Check the shift lever position sensor position.
scientia non olet · About LEMON Manuals