Installation [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL MOTOR CABLE WARNING:
Be sure to wear insulated gloves.
- Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
NOTE:- Keep the motor cable terminals and their installation area free from foreign matter, water, etc.
- Do not touch the waterproof seal or terminals of the motor cable.
- Engage the 2 claws to install a new terminal cap to the hybrid vehicle transaxle assembly.NOTE:
- Keep the terminal cap and its installation area free from foreign matter, water, etc.
- Do not pinch the O-ring.
- Check that the terminal cap is securely installed.
- Temporarily install the connector cover to the hybrid vehicle transaxle assembly with the 2 bolts.
- Tighten the 2 bolts to install the connector cover.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.
- INSTALL INVERTER WITH CONVERTER ASSEMBLY
Refer to INSTALLATION [06/2018 - ]