LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Emission Control System (A25A-FXS) - Service Information) >> Purge Valve >> Removal [06/2018 - ] >> Procedure

Removal [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 18 [06/2018 - 08/2020] , or refer to PROCEDURE - Step 18 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 18 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 18 [09/2022 - ]

  2. REMOVE PURGE VALVE (PURGE VSV) 
    1. Disconnect the purge valve (purge VSV) connector.
      GTY764037Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 1 Fuel Vapor Feed Hose
      *2 No. 2 Fuel Vapor Feed Hose
      *3 Purge Valve (Purge VSV)
    2. Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).
    3. Disconnect the No. 2 fuel vapor feed hose from the purge valve (purge VSV).
    4. Remove the bolt and purge valve (purge VSV) from the intake manifold.
scientia non olet · About LEMON Manuals