Installation [06/2018 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL PURGE VALVE (PURGE VSV)
- Install the purge valve (purge VSV) to the intake manifold with the bolt.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
*1 No. 1 Fuel Vapor Feed Hose *2 No. 2 Fuel Vapor Feed Hose *3 Purge Valve (Purge VSV) - Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).
- Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV).
- Connect the purge valve (purge VSV) connector.
- Install the purge valve (purge VSV) to the intake manifold with the bolt.
- INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 46 [06/2018 - 08/2021] , or refer to PROCEDURE - Step 47 [08/2021 - ]