LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Emission Control System (A25A-FXS) - Service Information) >> EGR Valve >> Inspection [06/2018 - ] >> Procedure

Inspection [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT EGR VALVE ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY745887Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without wire harness connected
      (EGR Valve Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (EGA+) - 2 (EGA-) 20°C (68°F) 3.1 to 3.7 Ω
      3 (EGB-) - 4 (EGB+)

      If the result is not as specified, replace the EGR valve assembly.

scientia non olet · About LEMON Manuals