LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Emission Control System (A25A-FXS) - Service Information) >> EGR Cooler >> Removal [06/2018 - 08/2020] >> Procedure

Removal [06/2018 - 08/2020]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 1

  2. REMOVE INVERTER WITH CONVERTER ASSEMBLY 

    Refer to REMOVAL [06/2018 - 08/2020]

  3. REMOVE EGR COOLER ASSEMBLY 
    1. Slide the 2 clips and disconnect the No. 3 water by-pass hose and No. 4 water by-pass hose from the EGR cooler assembly.
      GTY793493Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 3 Water By-pass Hose
      *2 No. 4 Water By-pass Hose
    2. Remove the 5 bolts and EGR cooler assembly from the cylinder head sub-assembly and EGR valve assembly.
      GTY773680Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the EGR valve gasket from the EGR valve assembly.
      GTY763889Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the EGR cooler gasket from the EGR cooler assembly.
      GTY763886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals