Removal [06/2018 - 08/2020]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
Refer to REMOVAL [06/2018 - 08/2020]
REMOVE CRANKSHAFT PULLEY ASSEMBLY
Refer to PROCEDURE - Step 19 [06/2018 - 07/2019] , or refer to PROCEDURE - Step 21 [07/2019 - 10/2019] , or refer to PROCEDURE - Step 19 [10/2019 - ]

REMOVE TIMING CHAIN COVER OIL SEAL

Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain case oil seal.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Protective Tape

NOTE:

After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.