Installation [08/2020 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ELECTRIC VEHICLE BATTERY PLUG ASSEMBLY WARNING:
Be sure to wear insulated gloves and protective goggles.
- Install the electric vehicle battery plug assembly to the HV battery with the bolt.
Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf)
- Connect the hybrid battery terminal block connector.NOTE:
Make sure that the connector is connected securely.
- Connect the HV battery junction block assembly connector.NOTE:
Make sure that the connector is connected securely.
- Engage the 2 claws to close the wiring harness protector.
- Connect the electric vehicle battery plug assembly connector.
- Install the electric vehicle battery plug assembly to the HV battery with the bolt.
- INSTALL NO. 1 HV BATTERY COVER PANEL RH
Refer to PROCEDURE - Step 14
- INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
See step 4
- INSTALL REAR UNDER COVER
See step 5
- INSTALL REAR UNDER SIDE COVER LH
See step 6
- INSTALL REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 29
- INSTALL REAR UNDER SIDE COVER RH
See step 8
- INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
- INSTALL REAR SEAT CUSHION LOCK HOOK
Refer to PROCEDURE - Step 4 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 4 [08/2021 - ]
- INSTALL REAR SEAT CUSHION ASSEMBLY
Refer to PROCEDURE - Step 5 [08/2020 - 08/2021] , or refer to PROCEDURE - Step 5 [08/2021 - ]
- INSTALL SERVICE PLUG GRIP
Refer to INSTALLATION [06/2018 - ]