LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Panoramic View Monitor System (Hybrid) - Diagnostics - Introduction) >> PANORAMIC VIEW MONITOR SYSTEM (for HV Model) >> Initialization [06/2018 - 09/2022] >> Initialization [06/2018 - 09/2022]

Initialization [06/2018 - 09/2022]

WARNING: This page is about a different car, the 2022 Lexus ES 300h, 2021 Lexus ES 300h, 2020 Lexus ES 300h, and 2019 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INITIALIZE PANORAMIC VIEW MONITOR SYSTEM 
    1. When "!" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.
      1. Fully turn the steering wheel to the left and right on level ground.
        NOTE:

        Memorizing the steering angle neutral point must be carried out with the engine running. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.

        HINT: 

        If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the left and right, perform Steering Angle Setting in Calibration.

        Refer to CALIBRATION [06/2018 - 09/2022] 

scientia non olet · About LEMON Manuals