DTC C1515: Torque Sensor Zero Point Adjustment Undone [06/2018 - ]: Description
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
This DTC does not indicate a malfunction. The power steering ECU (rack and pinion power steering gear assembly) stores this DTC when it determines that torque sensor zero point calibration has not been performed.
When the IG terminal voltage is below 8 V, torque sensor zero point calibration cannot be performed.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition | Note |
|---|---|---|---|---|---|---|
| C1515 | Torque Sensor Zero Point Adjustment Undone | This DTC is stored when torque sensor zero point calibration has not been performed. | Torque sensor zero point calibration | EPS warning light: Comes on | Zero point calibration is performed or the power switch is turned on (IG) again | There is no malfunction if this DTC is not output again after performing zero point calibration. |