LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Engine Control System (A25A-FKS) - Diagnostic Codes (08 Of 12)) >> SFI System >> DTC P107A-2A: Fuel Rail Pressure Sensor (Low) Signal Stuck in Range; DTC P107A-64: Fuel Rail Pressure Sensor (Low) Signal Plausibility Failure [08/2020 - 08/2021] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.

Fuel Pressure Sensor Stuck Monitor 

If the No. 2 fuel pressure sensor (for low pressure side) value does not follow the change in the target low pressure side fuel pressure, it is judged as a malfunction. If this malfunction is detected in 2 consecutive driving cycles, the ECM will illuminate the MIL and store DTC P107A-2A.

Fuel Pressure Sensor Correlation Monitor (Fuel Cut) 

If the No. 2 fuel pressure sensor (for low pressure side) value is less than or higher than the threshold value when the fuel pump on the low pressure side is operated at the maximum during a fuel cut, it is judged as a malfunction has occurred. If this malfunction is detected for 2 consecutive driving cycles, the ECM will illuminate the MIL and store DTC P107A-64.