Typical Enabling Conditions
WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
P106A
| Monitor runs whenever the following DTCs are not stored | P0106, P0107, P0108 (Manifold absolute pressure) P0400 (EGR system) P0401 (EGR system (closed)) P0452, P0453 (Evaporative emission system pressure sensor) |
| Time after engine switch off | 50 minutes |
| Time after ECM started by soak-timer | 60 seconds or more |
| Battery voltage | 8 V or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Engine coolant temperature | -10°C (14°F) or higher |
P106C
| Monitor runs whenever the following DTCs are not stored | None |
| Time after engine switch off | 50 minutes |
| Time after ECM started by soak-timer | 60 seconds or more |
| Battery voltage | 8 V or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Engine coolant temperature | -10°C (14°F) or higher |
| EVAP system pressure sensor malfunction (P0451, P0452, P0453) | Not detected |