LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Engine Control System (A25A-FKS) - Diagnostic Codes (08 Of 12)) >> SFI System >> DTC P0630-51: VIN Not Programmed [08/2021 - ] >> Procedure

DTC P0630-51: VIN Not Programmed [08/2021 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630-51) 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Engine / Trouble Codes.
    5. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      NOTE:

      If P0630-51 is output, the VIN must be written to the ECM using the Techstream. However, all DTCs are cleared automatically by the Techstream when the VIN is written. If DTCs other than P0630-51 are output, troubleshoot them first.

      Result

      Result Proceed to
      DTC P0630-51 is output A
      DTC P0630-51 and other DTCs are output B

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2021 - 09/2022]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2022 - ] 

    Result: 

    See step  2

  2. WRITE VIN 
    1. Write the VIN.

      Refer to REGISTRATION [08/2020 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END