Typical Enabling Conditions
WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever the following DTCs are not stored | None |
CASE 1
| All of the following conditions are met | - |
| Permanent Fault Code | Not stored |
| OBDII system commands | Store |
| Battery voltage | 8 V or higher |
CASE 2
| All of the following conditions are met | - |
| Permanent Fault Code | Stored |
| OBDII system commands | Clear |
| Battery voltage | 8 V or higher |
CASE 3
| Battery voltage | 8 V or higher |